Having a great business and high-quality equipment is the most important in the construction industry. However, when you start the construction process, it is vital to have some heavy equipment to carry out some heavy-duty tasks such as demolition and excavation. It is quite impossible to think about doing these jobs without the involvement of equipment in today’s world. However, when you have a heavy machine, you need to take care of many things that may disturb the equipment’s health and performance.
One of the main issues with the equipment is fluid contamination that directly affects the engine. Fluid contamination is, indeed, a big problem with construction equipment. It can cause many other serious problems for the equipment and its productivity. However, there are hundreds of ways to prevent contamination from occurring. This article will provide you with some tips that can help you control fluid contamination in your heavy equipment.
- Check the fluid regularly
The best way to prevent fluid contamination from your construction equipment is to check all the fluid in it regularly. This way, you can detect the presence of contaminants in fluids before they cause serious damage. Checking the fluid regularly will also give you an idea of how often your equipment needs maintenance. If you notice that there are some problems with the fluid level, it can be a sign that something is wrong with your equipment.
- Don’t let air get into the fluid
If you have a leaky valve, the fluid gets contaminated with dirt and dust, which reduces its effectiveness and leads to higher maintenance costs.
The best way to prevent air from getting into the fluid is to replace cracked or corroded parts as soon as possible. When you do this, you’ll avoid any chance of contamination and maintain safe working conditions for your equipment.
- Replace the filters often
Filters are important because they trap oil and other contaminants that can damage your equipment. However, they also catch large particles of dirt and dust that can clog up your bearings and cause friction heating. You need to replace the filters at least once every two months. This is because they are effective only for a limited period. When they become ineffective, they need to be replaced. Replacing the filters regularly is easy, just pull them out and throw them away in a trash can. You’ll need to replace them with a good-quality filter.
- Drain the tanks regularly
A fluid tank is a closed container that holds liquid, and the liquid/fluid inside a tank can be dangerous. If a tank leaks or if there is any kind of damage to it, then the contents will spill out and contaminate the ground around it. You need to drain the tank regularly because the burnt oil can damage the engine and the equipment as well. There are two main ways to drain a tank: Drain it through one of the ‘inlets’ on the side of the tank or put a hose into each outlet and pump until all the fluid comes out
- Don’t mix fluids and lubricants
Mixing the wrong fluids is a big problem in construction equipment, especially when it comes to hydraulic systems. The most common fluids that are not compatible with one another are oil, grease and diesel. Oil will destroy synthetic lubricants and cause them to rust, while grease can cause problems with water-based lubricants. If you use diesel fuel in your hydraulic system, it will destroy any shear pins in the equipment. So, be careful in this instance and do not mix any oil, grease or lubricants together.
Conclusion
Fluid contamination in construction equipment for sale is the biggest problem that affects the productivity of the equipment. Controlling the fluid contamination should be the prior job of an equipment owner. For this purpose, they may follow some simple steps on a regular basis. These simple hacks will keep your equipment safe from any damage. Read this article to know about the tips to control fluid contamination in your heavy equipment.
Also Read: 5 Easy Steps To A Winning Construction Strategy